Pyrite Floor Hardening Aggregate

1-3mm & 3-5mm Pyrite Granules

Wear-resistant Floor & Anti-slip Aggregate

1. Wear Resistant Floor Aggregate

✅ Pain Point

Common floor aggregates low hardness, easy sanding, surface scratch quickly, short service life, frequent floor renovation raise construction cost greatly.

✅ Solution

1-3mm / 3-5mm pyrite aggregate with high density, high Mohs hardness, uniform grain shape, perfectly mixed with cement and floor mortar.

✅ Data & Result

Mohs hardness reach 6.0-6.5, floor compression strength rise by 35%, anti-wear performance improve 40%, extend floor service life up to 20+ years, cut later maintenance cost by 60%.

✅ Usage

Mix aggregate and cement in ratio 2:1, spread evenly on ground surface, polish and cure completely.

2. Anti-slip Ground Material

✅ Pain Point

Factory workshop, parking lot, warehouse ground smooth easily slip, wet ground safety accident risk high, ordinary anti-slip material fade effect soon.

✅ Solution

Irregular granular pyrite forms rough surface texture, stable structure, never lose anti-slip property after long rolling friction.

✅ Data & Result

Ground friction coefficient increase to 0.65-0.75, greatly reduce slip accident rate, adapt heavy vehicle frequent rolling, anti-slip effect keep stable all year round.

✅ Usage

Spread evenly on surface layer during floor construction, suitable for indoor and outdoor heavy traffic area.

3. Industrial Site Hardening Aggregate

✅ Pain Point

Industrial yard, logistics yard soft ground, easy dusting, vehicle rolling cause ground crack, poor bearing capacity.

✅ Solution

High specific gravity pyrite granules fill ground gap, enhance overall compactness, firm ground structure, strong load-bearing capacity.

✅ Data & Result

Ground compactness reach above 96%, bear 50-80 tons heavy vehicle rolling, effectively prevent ground cracking and dust raising, one-time construction long-term use.

✅ Usage

Lay as base and surface layer aggregate for industrial site, match concrete to complete overall hardening construction.

FAQ

Q: Does pyrite aggregate fade or rust easily?

A: Natural pyrite ore stable chemical property, not easy oxidize and discolor, no rust pollution, keep floor neat appearance long time.

Q: Which particle size is more suitable for floor construction?

A: 1-3mm for thin-layer wear-resistant floor; 3-5mm for thick-layer heavy-load industrial ground.

Q: Is it compatible with all floor materials?

A: Fully match cement, epoxy mortar, wear-resistant floor paint and other mainstream building materials.

If you have any questions, needs, or cooperation intentions, please feel free to contact us through the following ways:

• Email: ​c32917930@gmail.com
• Whatapp/Wechat/phone:+86 18006417081
• Website: ​https://www.tlbncn.com/
• Address:No. 402, Building 9, No. 2899, North Section, Tongdu Avenue, Xihu Town, Tongguan District, Tongling City,  Anhui Province

Our professional team will provide you with one-on-one service, answer your questions, and assist you in completing the purchasing process.